For ESP32 based environments a WebUI is available to provide basic configuration and monitoring of your OpenMQTTGateway Device. Functions included are:
- Firmware Upgrade
# Login Authentication
By default access to the WebUI uses basic authentication to control access to your OpenMQTTGateway Device. The login is
admin and the password is your ota_password.
The communication with the WEBUI is not encrypted, which means that your data may be visible on your local network.
# Configuration Options
Abiltity to change the SSID and password for your Wifi, if the change is unsuccessful it will revert back to the previous wifi settings.
Abiltity to change the mqtt settings, if the change is unsuccessful it will revert back to the previous mqtt settings.
Ability to change the display of sensor to Metric or Imperial, and disable the WebUI Authentication
Ability to temporarily change the logging level.
Details of OpenMQTTGateway Device status
# Firmware Upgrade
Ability to upgrade firmware by URL or to latest version.
Ability to view messages from the OpenMQTTGateway console. The scope of messages visible in the UI is limited to just the OpenMQTTGatewy codebase, messages from the ESP hardware or other libraries are not visible,
Ability to inject commands to OpenMQTTGateway for processing. The commands accepted are of the form mqtt topic then json message. And as you are already on the target device, you do not need to include the device name ie
This works for all modules in your environment.